• Home
  • HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz

HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
  • HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
  • HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz、mySite、merchandisen

HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz

113.99
        SPECIAL OFFER

          Please select all product options

          Product was out of stock

          share
          Description

          Please note that this version is a kit and AP! does NOT come with an O3 air unit, O3 camera and SanDisk Card.

          Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with Crazy F405 ELRS HD flight controller, EX1103 11000Kv motors, and Gemfan Hurricane 2023 tri-blade propellers for superior power performance. 

          Be sure to check out all our pre-built quads, and all our Happymodel products!

          Specifications

          • Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
          • Size: 120mmx120mmx50mm
          • Brand Name: Happymodel
          • Wheelbase: 85mm

          FLIGHT CONTROLLER

          • Built-in voltage meter sensor, voltage meter scale 110
          • Built-in current meter sensor, current meter scale 470
          • MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
          • Power supply: 1-2S battery input (DC 2.9V-8.7V)
          • GYRO Sensor: BMI270  (SPI connection)
          • Built-in 12A(each) Blheli_S 4in1 ESC
          • Mount hole size: 25.5mm x 25.5mm
          • Built-in Serial ExpressLRS 2.4G
          • Model: Crazy F405 ELRS HD
          • Built-in BMP280 Barometer
          • Built-in 8MBp black box

          ONBOARD UART ELRS 2.4GHZ RECEIVER

          • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
          • Could update firmware via ExpressLRS configurator
          • Antenna: enameled copper wire 31mm length
          • Default firmware version: ExpressLRS V3.0.1
          • Firmware target: HappyModel EP 2400 RX
          • Telemetry output Power: <12dBm
          • RF Frequency: 2.4GHz

          ONBOARD 4-IN-1 ESC

          • Current: 12A continuous peak 15A (3 seconds)
          • Factory firmware: Bluejay ESC V0.19
          • Support BLHeli_S Bluejay firmware
          • Power supply: 1-2S LiPo/LiPo HV
          • Default protocol: DSHOT300
          • Firmware target: Z-H-30

          MOTORS

          • Motor Dimension(Dia.xLen):Φ13.5mmx15.5mm
          • Mode: EX1103 11000Kv
          • Shaft Diameter:Φ1.5mm
          • No.of Cells(Lipo):1-2S
          • Configu-ration:9N12P
          • Stator Diamter:11mm
          • Stator Length:3mm
          • Weight(g):3.8g

          PROPELLERS

          • Center Hole Dia:1.5mm
          • Center Thickness:5mm
          • Props Dia:52.17mm
          • Weight:0.88g
          • Pitch:2.3inch
          • Material: PC

          Includes

          • 1x HappyModel BNF Mobula8 1-2S HD 85mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz